180
Chapter 6 Installing Internal Options
6.7.3 How to Install the 5-inch Internal Device
Perform the following procedures to install a 5-inch internal device. To install Internal HDD Unit Bay
Conversion kit, the procedures differ. For the procedures, refer to "6.7.4 How to Install Internal HDD
Unit Bay Conversion kit" (
1
Turn off the server and connected devices, and unplug all power cables from
the outlet.
2
Remove the side and front covers.
"6.2 Removing and Attaching Covers" (pg.136)
3
Touch a metal part of the server to discharge static electricity.
4
Remove the dummy unit.
Pull the dummy unit out slowly, keeping the latches on the 5-inch storage bay rails (on both
sides) pressed inward.
`
Make sure to keep the removed dummy units for later use.
5
Remove the 5-inch storage bay rails from the removed dummy unit.
Remove eight screws securing the 5-inch storage bay rails to remove it.
Latches
Содержание Primergy TX300 S4
