Fujitsu Primergy TX120, Руководство пользователя

Страница: 196 / 263

196
Chapter 8 Configuring Hardware and Utilities
8.2.4 Boot Options Submenu
Use this submenu to set system startup options.
table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Halt On All Errors
(Unchangeable) Sets whether or not to stop the boot process and shut down
the system, in case a POST (Power On Self Test) error is
detected.
Keyboard Check • Disabled
• Enabled (Initial value) Sets whether or not to check keyboard connection during
POST.
SM Error Halt • Disabled
• Enabled (Initial value) Sets the procedure in case an error occurs regarding the fan
or temperature sensor.
Fast Boot Disabled (Unchangeable) Sets whether or not to reduce the scope of POST and thereby
speed up system startup.
Quiet Boot Disabled (Unchangeable) Sets whether or not to display the logo screen instead of
POST information.
Boot Menu Enabled (Unchangeable) Sets whether or not to display the boot drive selection
window after POST.
By selecting the boot drive from the [Boot Menu] window,
startup can be done from the selected boot drive regardless of
the [Boot Sequence] setting.
NumLock Auto (Unchangeable) The state of the NumLock during activation.
MultiBoot for HDs Enabled (Unchangeable) Sets whether or not it is possible to specify the order of hard
disks to boot the operating system (OS) when multiple hard
disk units are installed.
To perform a PXE boot, set to [Enabled].
Item Specific Help Boot Options
Change Values -/+
F9
Select Item
Select Menu
Select Sub-Menu Enter
F1
Esc Help
Exit
F10
Setup Defaults
Save and Exit
Advanced Security Server Exit Main
[Halt On All Errors]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled] POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
Boot Menu:
NumLock:
MultiBoot for HDs:
Boot Sequence