RX300 S7
Operating Manual
35
3
Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê
First of all, carefully read the safety instructions in
"Important information" on
page 37
and following.
Ê
Transport the server to the place where you want to set it up.
Ê
Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see
"Unpacking the server" on page 52
).
Ê
Make sure that you have all necessary manuals (see
"Documentation
overview" on page 12
); print out the PDF files if required.
Ê
Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê
Mount the server into the rack (see
"Installing/removing the server in/from
the rack" on page 53
).
Ê
Wire the server. To do this, refer to sections
"Connecting devices to the
server" on page 55
and
"Notes on connecting/disconnecting cables" on
page 60
.
Ê
Connect the server to the mains (see
"Connecting the server to the power
source" on page 57
).
Ê
Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
"Controls and indicators" on page 63
).
Содержание PRIMERGY RX300 S7
