Fujitsu PRIMERGY RX2560 M1 Скачать руководство пользователя страница 77

Страница: 77 / 94

TX2560 M1 / RX2560 M1

Operating Manual

Starting up and operation

–

Starting up for the first time:

For the Japanese market, please refer to "

はじめにお読みください

Press the On/Off button.

Insert ServerView Suite Installation DVD 1 in the DVD drive.

Follow the on-screen instructions (see also section

"Configuring the

server and installing the operating system with the ServerView
Installation Manager" on page 82

or section

"Configuring the server and

installing the operating system without the ServerView Installation
Manager" on page 83

–

System already installed

Press the On/Off button.

The server is switched on, performs a system test and boots the
operating system.

In the case of configurations with a large memory size, the boot
process may be prolonged and the screen may remain dark for
several minutes.

Switching the server off

The Power-on indicator (see

figure 7 on page 65

) lights up green.

Shut down the operating system properly.

The server is switched off automatically and enters standby mode. The power-
on indicator lights up orange.

If the operating system does not switch off the server automatically, press
the On/Off button for at least four seconds and/or send a corresponding
control signal for power button override.

Содержание PRIMERGY RX2560 M1































































































Результаты поиска

Содержание PRIMERGY RX2560 M1

Отзывы:

Fujitsu PRIMERGY RX2560 M1, Руководство по эксплуатации, Страница: 77 / 94

Результаты поиска

Содержание PRIMERGY RX2560 M1

Отзывы: