manualshive.com logo in svg

Fujitsu PRIMERGY RX2540 M6, Руководство по эксплуатации, Страница: 73 / 121

Поделиться
Скачать
Fujitsu PRIMERGY RX2540 M6 Скачать руководство пользователя страница 73

5.5.4.2

Connecting the power cord (AC PSU)

CAUTION

The AC PSU adjusts automatically to any mains voltage in the range
from 100 V - 240 V (AC PSU Platinum) or 200 V - 240 V (AC PSU
Titanium).

▶

You may only operate the server if its rated voltage range
corresponds to the local mains voltage.

▶

Connect the power cord to the PSU.

▶

If applicable, connect the main plug to an power outlet of the rack socket
strip.

To provide true phase redundancy, the second PSU should be
connected to a different AC power source from the other PSU. If one
AC power source should fail, the server will still continue to run.

▶

Ensure that the status indicator on the PSU is lit green, see 

"Indicator on 

hot-plug PSU" on page 45

.

You can secure the power cord with a cable clamp to ensure that the
power cord cannot be disconnected from the server by mistake.

Starting up

RX2540 M6

Operating Manual

73

Содержание PRIMERGY RX2540 M6


























































































































Отзывы:

Нет отзывов