![background image](http://html.mh-extra.com/html/fujitsu/primergy-rx100-s7/primergy-rx100-s7_operating-manual_121080049.webp)
RX100 S7
Operating Manual
49
Hardware installation
5.2
Installing/removing the server in/from the
rack
V
CAUTION!
●
Please observe the safety information and notes on rack mounting in
chapter
"Important information" on page 33
.
●
At least two people are needed to install / remove the server in the
rack. (For the Japanese market, please refer to "
安全上の注意
".)
●
The rack may tip over if more than one unit is removed at the same
time.
●
The server may not occupy the top height unit of the rack
(38HU/42HU PRIMECENTER Rack, DataCenter Rack,
19-inch standard rack (for the Japanese market)),
as otherwise boards cannot be replaced even with the plug-in module
fully extended.
V
CAUTION!
The server does not have cable management in the rack.
Before removal, all cables connected to the server must be removed
from the sockets. Proceed as follows:
●
Exit all applications and shut down the operating system properly.
●
Switch off the server.
●
Disconnect and remove all cables connected to the server.
●
Remove the server.
Содержание PRIMERGY RX100 S7
