2
Safety
DO:
●
Read the information contained in this section ‘Safety precautions’, before attempting to
install or operate the equipment.
●
Ensure that all electrical connections are properly made in accordance with instructions
in the documentation, and periodically check that the connections have not worn or
become damaged. If they have, consult your supplier or maintenance authority
●
Switch off the equipment before installing any internal items, and if an earth strap is not
available discharge any build up of static you may have on you before opening the system
unit.
●
Keep fingers, paper clips and other small items away from connectors or apertures in the
equipment.
●
Disconnect the equipment from the power supply if you are not going to use it for some
time.
●
Ensure that the power is disconnected before any covers are removed and that all the
covers are refitted before the power is re-connected.
●
Comply with any National Safety at work regulations relating to Information Technology
Electrical Equipment.
DO NOT:
●
Continue to operate the equipment if you have any doubt about it working properly, or
think that it is damaged. Disconnect it from the power supply and consult your supplier or
maintenance authority.
●
Connect the system directly to IT power systems which have an impedance earthed
neutral.
●
Removed any fixed covers unless you are qualified to do so.
●
Obstruct the ventilation slots in the equipment. This could cause overheating and shorten
the life of the equipment.
●
Trail cables across aisles or under carpets.
●
Expose the equipment to spilled liquids
2.MK3166(E)
02.7.2, 3:12 PM
Page 2
Adobe PageMaker 6.0J/PPC
