Fujitsu PRIMERGY MX130 S1 Скачать руководство пользователя страница 54

Страница: 54 / 85

System expansions

Fujitsu Technology Solutions

►

Close the casing (see "Closing the casing").

If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the

BIOS Setup

. If necessary, change the settings. Further information is provided in the

PCI board documentation.

Removing board from low-profile slot

►

Open the casing (see "Opening the casing").

►

Disconnect the cables connected to the board.

►

Press on the locking lever in the direction of the arrow (1), unhook it and swing it up in the
direction of the arrow (2).

►

Pull the board out of the slot (3).

For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the rear slot cover plate of the slot.

►

Push the rear slot cover plate into the slot (4). Ensure that the point of the sheet-metal cover
engages with the outside of the casing.

►

Fold the lock closed in the direction of the arrow (5) and allow it to engage.

►

Close the casing (see "Closing the casing").

If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the

BIOS Setup

. If necessary, change the settings. Further information is provided in the

PCI board documentation.

Содержание PRIMERGY MX130 S1






















































































Результаты поиска

Содержание PRIMERGY MX130 S1

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY MX130 S1, Руководство по эксплуатации

Результаты поиска

Содержание PRIMERGY MX130 S1

Отзывы:

Бренды по названию

Популярные бренды