Fujitsu PRIMERGY CX420 S1, Руководство по эксплуатации, Страница: 19 / 56

CX420 S1
Operating Manual 19
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your Dual
Node Cluster Server. Links take you to sections where you can find more
detailed information about the respective steps:
Ê
First of all, carefully read the safety instructions in "Important information" on
page 21 .
Ê
Transport the Dual Node Cluster Server to the place where you want to set
it up.
Ê
Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
"Unpacking the Dual Node Cluster Server" on
page 36 ).
Ê
Make sure that you have all necessary manuals (see "Documentation
overview" on page 8 ); print out the PDF files if required.
Ê
Components that have been ordered additionally may be delivered loose
with the Dual Node Cluster Server. For mounting refer to the original
component documentation.
Ê
Mount the Dual Node Cluster Server into the rack (see "Installing/removing
the Dual Node Cluster Server in/from the rack" on page 37 ).
Ê
Wire the Dual Node Cluster Server. Follow the instructions in sections
"Installing a server node to the Dual Node Cluster Server" on page 39 and
"Notes on connecting/disconnecting cables" on page 42 .
Ê
Connect the Dual Node Cluster Server to the mains (see section
"Connecting the Dual Node Cluster Server to the mains" on page 40 ).
Ê
Familiarize yourself with the controls and indicators on the front and rear of
the Dual Node Cluster Server (see section
"Controls and indicators" on
page 45 ).