Fujitsu PRIMERGY BX600 S2, Руководство по эксплуатации

Страница: 65 / 173

PRIMERGY BX600 S2 Basic Unit
65
Preparation for Use and Operation Updating BX600 System Components

Console Redirection Switch Blade page_3_2.


--------------------------------------------------------------------------------


(1) Console Redirect Switch Blade_1


(2) Console Redirect Switch Blade_2


Enter selection or type (0) to quit: 1

Ê
Enter the desired switch blade.
The command line interface session starts.

Press <Ctrl-Q> Return Console Menu

 
 
 
 
 
Ê
Press the
Return
key to switch to command mode.
Command mode is indicated by the prompt
Console#
.

CLI session with the Switch Blade is opened.


To end the CLI session, enter [Exit].

 

Condole>enable


Console#config


Console(config)#interface vlan 1


Console(config-if)#ip address 10.50.50.51 255.0.0.0


Console(config-if)#exit


Console#show ip interface


TP address and netmask: 10.50.50.51 255.0.0.0 on VLAN 1,


and address mode: User specified

 

Console#

Ê Enter the commands specified above.
I
The specifications for the IP address and the subnet mask are merely
examples and are probably not valid for your system.
Ê
Terminate the command line session by pressing {Strg} [Q] .
Ê
Check the newly created LAN connection by pinging the switch blade on the
client system.
Ê
Install your TFTP server software and start it.
Ê Download the TFTP update package BX600 S2_TFTP-
IMAGES_<version>.exe from the Fujitsu Siemens download server at
http://www.fujitsu-siemens.com/support/downloads.html .