Fujitsu PRIMEQUEST 400 Series, Руководство по установке, Страница: 315 / 446

C122-E001-10EN 4-129
4.10 Setting Up the Dump Environment (Windows Server 2003)
5
Click [Change] of [Virtual Memory].
The Virtual Memory dialog box appears.
Figure 4.55 [Virtual Memory] dialog box
6
Specify the drive on which a paging file is created.
From the [Drive] field, select the drive on which the system is installed. The
selected drive is displayed at [Drive] under [Paging file size for selected drive].
7
Select the [Custom size] option button and enter a value in [Initial size].
To find out the minimum value, follow the procedure below:
1 Enter the minimum value in the [Initial size (MB)] field in the [Custom size:]
section (if the [Virtual Memory] dialog box shown in Figure 4.55 is
displayed, this value is 16 MB, which is the value of [Minimum allowed:] in
the [Total paging file size for all drives] section). Enter the minimum value +
2 MB in the [Maximum size (MB)] field (if the [Virtual Memory] dialog box
shown in Figure 4.55 is displayed, this value is 18 MB). Click the [Set]
button.