Fujitsu primequest 2400E2 Скачать руководство пользователя страница 94

Страница: 94 / 137

PRIMEQUEST 2000 Series Design Guide

3.3.4 HDD Configuration (2/5)



Notes (2/2)

•

When internal HDDs are used, the hardware RAID controller may fail to fully detect failures on a hard disk,

and a system slowdown may occur.

[Additional Notes]
If intermittent media errors occur on a HDD, a slowdown may occur on rare occasions.
This problem may occur for example due to many scratches in a wide area on the HDD. The RAID

controller tries to replace the media error area and salvage data using RAID parity. Therefore, if

intermittent media errors occur over a long time, the salvage processing takes a longer time and the

conventional media access processing is delayed.

If there are restrictions in operation, the following options are recommended.

- Use ETERNUS.

- Replace the HDD with a SAS-SSD.

•

When using an internal SSD for a PCI slot, note the following points.

- The SSD cannot be used as a boot drive.
- When a failed SSD is replaced, the integrity of the data in the drive cannot be guaranteed. Reliability

design including recovery from a regular backup and software RAID configuration is required to prepare

for possible risks.

•

When using an internal HDD in an SB, note the following points.

When the HDD is used as a boot drive or a data disk and the Reserved SB function is used, the HDD

cannot be started or operated.

Содержание primequest 2400E2







































































































































Результаты поиска

Содержание primequest 2400E2

Отзывы:

Fujitsu primequest 2400E2, Руководство по конструкции, Страница: 94 / 137

Результаты поиска

Содержание primequest 2400E2

Отзывы: