Fujitsu PRIMEPOWER650, Руководство пользователя

Страница: 155 / 195

U41261-J-Z816-4-76 125
CHAPTER 6 RCI Commands
1
This chapter describes RCI commands.
6.1 Overview
The Remote Cabinet Interface (RCI) connects the main unit to the I/O units, and
makes the I/O power supply becomes a slave to the main unit power supply. The RCI
also notifies the main unit of any errors that occur in I/O units.
RCI commands display RCI configuration information and set node addresses.
When adding an RCI port equipped I/O device, connect the device using the supplied
RCI cable, then perform set-up using the RCI commands.
6.2 RCI Commands
This section provides a list of RCI commands (see Table 6.1 ), a display example, and
an explanation of how to use RCI commands.
(1) List of commands
Table 6.1 List of commands
Command Function
rci-config This command displays the RCI configuration information. Use this
command to check that the host and I/O are correctly set after making the
RCI setting.
rci-configio-init This command enters the RCI configuration information when the RCI
connections of the I/O devices are initially made.
rci-configio This command sets and incorporates the RCI configuration information
when adding or deleting nodes.