Preparation for use and operation
Preparing your notebook for operation
10
A26391-K82-Z101-3-7619
•
The power adapter must be at least 200 mm away from the notebook. It must be free-standing
and must not be covered. Do not place the power adapter on heat-sensitive material.
•
For wireless data transfer you must align the notebook's IrDA interface with that of the partner
device (e.g. PC). The devices must not be more than one meter apart.
Preparing your notebook for operation
!
The power cord supplied conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The notebook and the power adapter should be at least 200 mm apart. Keep other objects
100 mm clear of the notebook and its power adapter.
Do not cover the ventilation slots in the notebook and the power adapter.
Place the notebook on a flat, sturdy surface.
1
2
3
Connect the power adapter cable to the DC jack (DC IN) of the notebook (1).
Connect the power cable to the power adapter (2).
Plug the power cable into the power outlet (3).
i
You can also make your notebook operational by connecting it to the optional car adapter
(see "
Charging, caring for and maintaining the notebook battery
").
