E-16
BASIC PROCEDURE OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.)
1
Press
;
.
The main menu screen will appear.
2
Press
E
or
F
to select “PICTURE”.
Each time you press
E
or
F
, one of the available
menus appears in the following sequence:
PICTURE
<
POSITION/SIZE
<
AUDIO
<
FEATURES
<
FACTORY DEFAULT
The PICTURE Menu screen will appear.
3
Press
C
or
D
to select “Tint”.
4
Press
<
.
The “Tint” adjustment screen will appear.
5
Press
E
or
F
to change tint values.
F
: More greenish colors
E
: More purplish colors
6
Press
<
to store.
7
Press
;
when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select “Default” and press
<
.
The PICTURE items are changed back to the default
settings available when the plasma display was
purchased.
* Press
;
to halt the operation in progress.
“PICTURE” selected in the main
menu screen
“Tint” selected in the PICTURE
Menu screen
“Tint” adjustment screen
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be available with some models and some device options.
• The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
7619_E.book 16 ページ ２００６年１０月１１日 水曜日 午後８時１８分
