7
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 3. Drive0 Master Submenu
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field
Options
Default
Description
Drive0:
■
Disabled
■
Enabled
[Enabled]
Enables or disables Drive0.
Type:
---
---
Displays the drive device type in Drive0. This field is for information only.
Model:
---
---
Displays the model number of the device in Drive0. This field is for
information only.
Capacity:
---
---
Displays the maximum capacity of your hard disk. This field is for
information only.
Phoenix SecureCore(tm) Setup Utility
F1
Help
ESC
Exit
Select Item
Select Menu
-/Space
Enter
F9
Setup Defaults
F10
Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Drive0 [WDC WD3200BEVS-16VAT0]
Drive0:
[Enabled]
Type: Hard Disk
Model: WDC WD3200BEVS-16VAT0
Capacity: 320GB
▲
Info
System
Advanced Security Boot Exit
S y s t e m M e n u
