Fujitsu P27T-7, Руководство по эксплуатации, Страница: 22 / 40

Operation
Operation
Switching the device on and off
1 2 3
1 2 3
1 = On/Off touch sensor
2 = Power indicator 3 = 0 W switch (on the rear of the monitor)
The colour of the LED indicator changes as follows:
LED indicator Status
blue Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orange
Monitor is not receiving a video signal or is in BASIC power saving
mode.
does not light up Monitor is switched off (or is in
0 W energy-saving mode).
The switch position "0" of the 0 W switch (3) on the rear activates ECO
energy saving mode (0 W operating mode), and switch position "I" switches
to BASIC energy saving mode <1 W. This position is required only for the
DP data cable, but can also be necessary for VGA or DVI on some PCs if
the monitor remains dark in 0 W operating mode.
► Switch the device on with the On/Off touch sensor (1).
18 Fujitsu