Fujitsu P24W-7 LED, Руководство по эксплуатации

Страница: 41 / 48

Troubleshooting
Having this problem? Check the following points:
Picture is shaking
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is wrongly adjusted ► Run the Factory Recall function in the OSD
menu.
The Auto Processing message appears.
Picture disturbances (vertical lines) ► Press the AUTO button to conduct the
auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture
noise) ► Press the AUTO button to conduct the
auto-adjustment of the screen.
The screen becomes darker The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
► Contact our Service Desk.
Screen display suddenly becomes darker during
operation and then suddenly goes black after a
certain amount of time. ► Reset your distance to the display using the
Proximity setting in the OSD menu.
► Increase the setting until the setting bar
projects over the detected distance.
Fujitsu 37