Operation
Selecting input signal (D-SUB/DVI-D/HDMI)
►
Press the
INPUT
/
button to call up the
Input select
settings window.
►
Press the
ECO
/
or the
INPUT
/
button to select the desired
monitor connection (VGA, DVI or DP).
►
Press the
MENU
/
button to con
fi
rm your selection or the
AUTO
/
button to cancel the process.
This setting window can also be called up when the OSD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
►
Press and hold the
MENU
/
button for a few seconds while you switch
on the monitor using the ON/OFF switch.
The message
OSD locked / unlocked
is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
►
Press the
ECO
/
button to switch the ECO operating mode on or off.
The message
ECO Mode ein
or
ECO Mode off
appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode
Of
fi
ce
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Fujitsu Technology Solutions
21
Downloaded from ManualMonitor.com Manuals
