13
3.5 TV-OUT Function Instructions
NOTE:
Before you power on your system, you have to be sure the VGA
card is installed already and all the cables are connected to
prevent form the card get burnt.
3.5.1 How to enable the TV-OUT function
War ning
:
The MVGA-NVG11A/P/AL/AT/PT needs to see real 75 ohms AV
input. Connect the signal cable between TV-OUT at VGA card and
TV's Video input, and turn on the TV before launch ‘
Display
Properties
’ window. Otherwise the TV-OUT function would be
gray and un-selectable.
1. Set the correct jumper at your VGA card for TV formats (PAL BG/NTSC… ).
2. Boot-up the system and display to monitor.
3. Connect the signal cable between TV-OUT at VGA card and TV’s Video input
and turn on the TV.
4. After launch ‘
Display Properties
’ window then:
A. Click ‘
Settings’
tab
B. Click ‘
Advanced
… ’
C. Click ‘
Output Device
’
tab
D. Select ‘
TV
’
E. Click ‘
Change For mat...
’
D
A
E
B
C
