Fujitsu MHN2100AT - Mobile 10 GB Hard Drive, Руководство по эксплуатации продукта

Страница: 217 / 236

6.4 Read-Ahead Cache
C141-E120-02EN 6-15
3) After reading the requested data and transferring the requested data to the
host system had been completed, the disk drive stops command execution
without performing the read-ahead operation.
Read-requested data
Empty area
DAP
(stopped)
(stopped)
HAP
4) Following shows the cache enabled data for next read command.
Cache enabled data
Empty area
6.4.3.2 Sequential read
When the disk drive receives the read command that targets the sequential address
to the previous read command, the disk drive starts the read-ahead operation.
a. Sequential command just after non-sequential command
When the previously executed read command is an non-sequential
command and the last sector address of the previous read command is
sequential to the lead sector address of the received read command, the
disk drive assumes the received command is a sequential command and
performs the read-ahead operation after reading the requested data.
1) At receiving the sequential read command, the disk drive sets the DAP and
HAP to the start address of the segment and reads the requested data from the
load of the segment.
Empty area Mis-hit data
DAP
HAP
Start LBA Last LBA