Fujitsu MH2060AH - 60GB UDMA/100 5400RPM 8MB 9.5mm Notebook Hard Disk Drive, Руководство по эксплуатации продукта

Страница: 177 / 250

5.3 Host Commands
C141-E195-02EN 5-107
5.3.3 Error posting
Table 5.21 lists the defined errors that are valid for each command.
Table 5.21 Command code and parameters (1 of 2)
Command name Error register (X’1F1’) Status register (X’1F7’)
ICRC UNC INDF ABRT TK0NF DRDY DWF ERR
READ SECTOR(S) V V V V V V
WRITE SECTOR(S) V V V V V
READ MULTIPLE V V V V V V
WRITE MULTIPLE V V V V V
READ DMA V *2 V V V V V V
WRITE DMA V *2 V V V V V
WRITE VERIFY V V V V V V
READ VERIFY SECTOR(S) V V V V V V
RECALIBRATE V V V V V
SEEK V V V V V
INITIALIZE DEVICE PARAMETERS V V V V
IDENTIFY DEVICE V V V V
IDENTIFY DEVICE DMA V V V V
SET FEATURES V V V V
SET MULTIPLE MODE V V V V
SET MAX ADDRESS V V V V V
READ NATIVE MAX ADDRESS V V V V
EXECUTE DEVICE DIAGNOSTIC *1 *1 *1 *1 *1 V
READ LONG V V V V V
WRITE LONG V V V V V
READ BUFFER V V V V
WRITE BUFFER V V V V
IDLE V V V V
IDLE IMMEDIATE V V V V
STANDBY V V V V
STANDBY IMMEDIATE V V V V
V: Valid on this command
*1: See the command descriptions.
*2: Valid only for Ultra DMA command.