Fujitsu MB2198-790-01-E, Руководство по эксплуатации

Страница: 10 / 12

5
4. Connection
■
Mounting the Configuration Board
Use the following procedure to mount the configuration board in the configuration board connector on
the adapter board (see Figure 3).
1. Align the positions of the adapter connector mounted on the rear side of the configuration board with
the configuration board connector mounted on the adapter board.
2. Push the configuration board vertically down.
Figure 3 Mounting the configuration board
Warning: Support the rear of the adapter board while you are pushing on the board to avoid placing stress on the
emulator and adapter board while you are mounting the configuration board.
CN2 FLAT CABLE CN A
CN3 FLAT CABLE CN B
CN4 FLAT CABLE CN C
S18
CN1
Configuration board
Adapter connector (mounted on rear surface)
Configuration board
connector