Fujitsu MB2147-541, Руководство по эксплуатации

Страница: 2 / 14

PREFACE
Thank you for purchasing the LQFP-64P *
1
probe header (MB2147-541) for the F
2
MC-16 family
emulator.
The LQFP-64P probe header is a header board *
2 used to connect the F 2 MC-16L/16LX emulator
(MB2147-01) * 3 and the F 2 MC-16L/16LX emulator PGA-299P adapter board (MB2147-20) * 4 to a
user system. that uses Fujitsu micro controller F
2
MC-16LX family MB90F983 (LQFP-64P).
This manual explains the handling of the LQFP-64P probe header for the F 2 MC-16 family emulator.
Before using the MB2147-541, be sure to read this manual.
Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro-
duced MCUs and evaluation MCUs.
*1 : The lead pitch of package (FPT-64P-M03) is 0.5 mm and the body size is 10 mm
×
10 mm.
*2 : referred to as “header board”
*3 : referred to as "emulator"
*4 : referred to as "adapter board"
■
Handling and use
The handling and use of this product and notes regarding safety use are included in the hardware
manual of the F
2
MC-16 family emulator.
•
F 2 MC-16L/16LX EMULATOR
MB2147-01 HARDWARE MANUAL
•
F
2
MC-16L/16LX EMULATOR PGA-299 ADAPTER BOARD
MB2147-20 HARDWARE MANUAL
■
Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
The wrong use of a device will give an injury and may cause malfunction on cus-
tomers system.
Cuts
This product has parts with sharp points that are exposed.
Do not touch edge of the product with your bare hands.
Damage
When connect the header board to the user system, correctly position the index
mark (
▲
) on the NQPACK mounted on the user system with the index mark (
▲
)
on the header board, otherwise the emulator system and user system might be
damaged.
Damage
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.