Fujitsu LT WALL Series Скачать руководство пользователя страница 21

Страница: 21 / 23

En-20

CLEANING AND CARE

Install or Replace the Air Cleaning Filter

1. Open the intake grille and remove the air

lters.

Please refer to the page 19.

2. Remove the dirty air cleaning filters

attached to the frames of the front panel.

(When replacing)

Air cleaning

lter frame

Air cleaning

lters

3. Attach the new (or maintained) air clean-

ing

lters to the frame of the front panel.

Air cleaning

lter frame

Air cleaning

lter

Tabs (7 places)

The new air cleaning

lters can be attached to any of the

right frame or the left frame.

Replace

lters with the following components (purchased

separately).

●

POLYPHENOL CATECHIN AIR CLEANING FILTER :

UTR-FA16

●

NEGATIVE AIR IONS DEODORIZING FILTER:

UTR-FA16-2

4. Install the air

lters and close the intake

grille.

Please refer to page 19.

About the Air Cleaning Filters

●

When Air Cleaning Filters are used, the effect will increased

by setting the fan speed to “High”.

[POLYPHENOL CATECHIN AIR CLEANING FILTER]
(1 sheet)

●

The Air Cleaning Filters are disposable

lters. (They can not

be washed and reused.)

●

For storage of the Air Cleaning Filters, use the

lters as soon

as possible after opening the package.

(The air cleaning effect decreases when the

lters are left in

the opened package)

●

Generally, the

lters should be exchanged about every 3

months.

Please buy dedicated air cleaning filters (UTR-FA16) (Sold

separately) to exchange the used dirty air cleaning

lter.

[NEGATIVE AIR IONS DEODORIZING FILTER (light blue)]
(1 sheet)

●

The

lter should be exchanged about every 3 years so as to

maintain the deodorizing effect.

●

Filter frame is not a one-off product.

Please buy dedicated deodorizing

lter (UTR-FA16-2) (Sold

separately) when exchanging the

lter.

Maintenance of Deodorizing Filters

In order to maintain the deodorizing effect, please clean the

lter in the follow way once 3 months.

(1) Remove the deodorizing

lter.

(2) Clean with water and dry in the air.

1) Flush the

lter with high-pressure hot water until the

surface of the

lter is covered with water. Please

ush

with diluent neutral detergent.

Never wash by reaming or rubbing, otherwise it will

damage the deodorizing effect.

2) Rinse with water

ow.

3) Dry in shade.

(3) Reinstall the deodorizing

lter.

Filter Indicator Reset (The special setting)

Can be used if set correctly during installation.

Please consult authorized serviceman when using this

function.

●

ECONOMY lamp will

ashing on when it is time to clean the

air

lters.

Indicator Lamp

OPERATION

ECONOMY

TIMER

: Flashing

●

Clean the air

lters referring to page 19.

●

After cleaning, press the MANUAL AUTO button

for

2 seconds or less on the indoor unit. (See page 3)

9319356013-02_OM.indb 20

3/21/2011 10:48:27 AM

Содержание LT WALL Series
























Результаты поиска

Содержание LT WALL Series

Отзывы:

Похожие инструкции для LT WALL Series

Бренды по названию

Популярные бренды

Fujitsu LT WALL Series, Руководство по эксплуатации

Результаты поиска

Содержание LT WALL Series

Отзывы:

Похожие инструкции для LT WALL Series

Бренды по названию

Популярные бренды