87
- Troubleshooting
The battery seems to
discharge too quickly.
(continued)
The battery is very old.
Replace the battery.
The battery has been
exposed to high temper-
atures.
Replace the battery.
The battery is too hot or
too cold.
Restore the notebook to normal operating temperature. Charging
icon on the Status Indicator panel will flash when battery is out-
side of operating range.
Shutdown and Startup Problems
The Suspend/Resume but-
ton does not work.
Suspend/Resume
button is disabled.
In Windows XP, enable the button by going to the Control Panel ->
Power Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the option that best suits your needs.
In Windows Vista, select the “Choose what the power button
does” option.
There may be applica-
tion software. conflict
Close all applications and try the button again.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
The boot sequence set-
tings of the setup utility
are not compatible with
your configuration.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the setup
utility and adjust the source settings from the Boot menu.
“BIOS Setup Utility” on page 41.
You have a secured
system requiring a
password to load your
operating system.
Make sure you have the right password. Enter the setup utility and
verify the Security settings and modify them as accordingly.
“BIOS Setup Utility” on page 41.
Internal hard drive was
not detected.
Use the BIOS setup utility or Primary Master submenu, located
within the Main menu, to try to auto detect the internal hard drive.
Problem
Possible Cause
Possible Solutions
