Fujitsu LifeBook U9312 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 82

Fujitsu LifeBook U9312 Скачать руководство пользователя страница 70

Troubleshooting and tips

Reset by switching off the battery

If the device no longer responds and does not react to the ON/OFF switch, use the battery
on/off button to switch the device off, it is located on the bottom of the device.

► Switch the battery off, then switch it on again (see section

"Switch the battery off and on", Page 33

Recovering drive contents from the Recovery DVD

Drive

Operatingsystem,restoring

You can use the "Windows Recovery DVD" (optionally available) and the "Divers
& Utilities" DVD to reinstall the operating system.

The instructions are provided on the case of the Recovery DVD.

You will need an external optical drive available as an accessory.

During the reinstall process your personal ﬁles and any installed programs will be deleted.
We advise you to backup your ﬁles to an external hard drive or DVD disk before you start.

► Switch the notebook on.
► Press function key

F12

.

► Insert the "Windows Recovery DVD" into the optical drive.
► Select the DVD drive and press the Enter key.
► Follow the instructions on the screen.

After the installation you must install all the drivers again. Some installed hardware
components will not be correctly supported until this has been done.

► Insert the "Drivers & Utilities" DVD into the optical drive. The DVD starts automatically.
► Click on the

Desk Update

button.

► Select

Automatic driver installation (Express)

and click on

Start installation

.

► Follow the instructions on the screen.
► Restart your notebook when the driver installation is completed.

Restoring the system under Windows

If necessary, you can reset your system to the original state of the drive.

► Select

Settings

from the Start menu.

► Select your

System

.

► Select

Recovery

.

► Select

Reset this PC

.

The system will be reset.

66

Fujitsu

«
...
68
69
70
71
72
...
»

Содержание LifeBook U9312



















































































Отзывы:

Нет отзывов