77
- Memory Upgrade Module
Memory Upgrade Module
Your Fujitsu LIFEBOOK Tablet PC comes with a minimum of 2GB of high speed Double Data Rate Synchronous Dynamic
RAM (DDR3-1600 SDRAM) factory installed. To increase your Tablet PC’s memory capacity, you may install an additional
memory upgrade module. The memory upgrade must be a dual-in-line (DIMM) SDRAM module. To ensure 100%
compatibility, purchase the SDRAM module only from the Fujitsu web store at www.shopfujitsu.com
.
Installing Memory Upgrade Modules
1
Turn off power to your Tablet PC, remove any power adapter (AC or auto/airline). Remove the battery.
2
Make sure that all the connector covers are closed.
3
Turn the Tablet PC bottom side up, and remove the screw from the memory upgrade module compartment.
4
Lift and remove the cover from the memory module compartment (Figure 41).
5
Remove the memory upgrade module from the static guarded sleeve.
6
Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade
module with the connector slot in the compartment.(Figure 42)
•
D
O
NOT
REMOVE
ANY
SCREWS
FROM
THE
MEMORY
UPGRADE
MODULE
COMPARTMENT
EXCEPT
THE
ONES
SPECIFICALLY
SHOWN
IN
THE
DIRECTIONS
FOR
INSTALLING
AND
REMOVING
THE
MEMORY
UPGRADE
MODULE
.
•
T
HE
MEMORY
UPGRADE
MODULE
CAN
BE
SEVERELY
DAMAGED
BY
ELECTROSTATIC
DISCHARGE
(ESD). T
O
MINIMIZE
RISK
TO
THE
MODULE
,
OBSERVE
THE
FOLLOWING
PRECAUTIONS
:
•
B
EFORE
HANDLING
A
MEMORY
MODULE
,
TOUCH
A
GROUNDED
METAL
OBJECT
TO
DISCHARGE
STATIC
ELECTRICITY
BUILT
UP
IN
YOUR
BODY
.
•
W
HEN
INSTALLING
OR
REMOVING
A
MEMORY
MODULE
,
HOLD
IT
BY
THE
EDGE
SO
AS
NOT
TO
TOUCH
ANY
CONTACTS
OR
CHIPS
. B
E
CAREFUL
NOT
TO
TOUCH
ANY
INTERNAL
COMPUTER
TERMINALS
OR
COMPONENTS
;
THE
OIL
FROM
YOUR
FINGERS
COULD
CAUSE
A
SHORT
TO
THE
COMPONENTS
.
•
B
E
SURE
TO
POWER
DOWN
YOUR
SYSTEM
BEFORE
ADDING
OR
REMOVING
MEMORY
MODULES
. E
VEN
IF
THE
SYSTEM
IS
IN
HIBERNATE
OR
SLEEP
STATES
,
DATA
COULD
BE
LOST
OR
THE
MEMORY
COULD
BE
DAMAGED
IF
POWER
IS
STILL
AVAILABLE
TO
THE
SYSTEM
.
