Fujitsu Lifebook S6231, Руководство пользователя, Страница: 61 / 112

53
T r o u b l e s h o o t i n g
Notebook fails to recognize
DVD/CD-RW/CD-ROM’s.
(continued)
DVD/CD-RW/CD-ROM is
dirty or defective. Wipe DVD/CD-RW/CD-ROM with a non-abrasive
CD cleaning cloth and reinsert. If it still will not
work try another disc in the drive.
The DVD/CD-RW/CD-
ROM Access indicator on
the Status Indicator Panel
blinks at regular intervals
when no DVD/CD-RW/
CD-ROM is in the tray or
the DVD/CD-RW/CD-
ROM drive is not installed. The Windows DVD/CD-RW/
CD-ROM auto insertion func-
tion is active and is checking to
see if a DVD/CD-RW/CD-
ROM is ready to run. This is normal. However, you may disable this
feature.
Floppy Disk Drive Problems
You cannot access your
floppy disk. You tried to write to a write
protected floppy disk. Eject the floppy disk and set it to write enable.
(See Preparing a Disk for Use on page 37 for more
information)
Floppy disk is not loaded
correctly. Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 37 for more information)
The floppy disk drive may not
be properly installed. Remove and re-install your floppy disk drive.
Security is set to protect access
to floppy disk data. Verify your password and security settings.
Hard Drive Problems
You cannot access your
hard drive. The setup utility is incorrectly
set for your internal (Primary
Master) or optional second
hard drive (Primary Slave). Revise BIOS settings to set both Primary Master
and Primary Slave correctly.
(See BIOS Setup Utility
on page 27 for more information)
The wrong drive designator was
used by an application when a
bootable CD-ROM was used to
start the notebook. Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a CD, drive designations
are automatically adjusted.
Security is set so your operating
system cannot be started
without a password. Verify your password and security settings.
Keyboard or Mouse Problems
The built-in keyboard does
not seem to work. The notebook has gone into
Suspend mode. Push the Power/Suspend/Resume button.
Your application has locked out
your keyboard. Try to use your integrated pointing device to restart
your system.
You installed an external
keyboard or mouse and it
does not seem to work. Your external device is not
properly installed. Re-install your device. (See Device Ports on page 45
for more information)
Your operating system software
is not setup with the correct
software driver for that device. Check your device and operating system docu-
mentation and activate the proper driver.
Problem Possible Cause Possible Solutions
S Series.book Page 53 Friday, October 15, 2004 4:46 PM