65
- Memory Upgrade Module
Removing a Memory Module
Installing a Memory Module
1
Align the connector edge of the memory upgrade module, chip side up, with the connector slot in the
compartment.
(Figure 25)
2
Insert the memory upgrade module at a 45
o
angle and press it firmly onto the connector.
3
Press the memory upgrade module down into the compartment until it locks underneath the retaining clip. You
will hear a click when it is properly in place.
4
Replace the memory compartment cover.
(Figure 26)
1
Perform steps 1 through 3 of Accessing the
Memory Compartment.
2
Pull the module clips sideways away from each
side of the memory module simultaneously.
(Figure )
3
While holding the clips out, remove the module
from the slot by lifting it up and pulling towards the
back of your LIFEBOOK notebook.
4
Store the memory upgrade module in a static
guarded sleeve.
5
Install a new memory module as detailed in the
procedure below.
6
Replace the memory compartment cover.
(Figure 26)
Figure 24. Removing a memory module
Содержание Lifebook P701
Страница 2: ...User s Guide Learn how to use your Fujitsu LIFEBOOK P701 notebook ...
Страница 81: ...80 Port Replicator Figure 35 Attaching Figure 36 Unlatching Figure 37 Removing Docking Connector Release Latch ...
Страница 176: ...Guide d utilisation Découvrez comment utiliservotreordinateur portable Fujitsu LIFEBOOK P701 ...
Страница 223: ...48 Écran ...