manualshive.com logo in svg

Fujitsu LIFEBOOK 990Tx2, Руководство пользователя

Поделиться
Скачать
Fujitsu LIFEBOOK 990Tx2 Скачать руководство пользователя страница 110

S e c t i o n   T h r e e

100

Menu Field

Options

Default

Description

Auto Save to Disk:

Off; After 1 Hour.

[Off]

When set to

After 1 Hour 

your notebook wi ll autom a ti c a lly 

save all of system memory and the operating parameters to the 
hard drive and go to the pseudo-off if you leave your notebook in
Suspend mode for an hour.

Resume On

On;Off.

[Off]

Sets whether or not to Resume from a suspension state when a

Modem Ring:

message is received by telephone line. This feature is not available
if the Save-to-Disk mode is enabled. This feature applies to internal,
external and PC Card modems.

Resume On Time:

On; Off.

[Off]

Sets whether or not to resume from a suspension state at a
designated time. This feature is available from either the Suspend
mode or the Save-to-Disk mode.

Resume Time:

—

—

Sets the designated time, on a 24-hour clock, when the notebook
is to automatically resume operation from the Suspend state.
The format of the clock setting is hours:minutes:seconds. Each
segment of the time is set separately, either by incrementing or by
typing in the numbers. You move between the segments with the

Tab

key or the 

Shift+Tab

keys. This only applies when Resume on

Time is set to On.

Advanced Features:

—

—

When selected, opens the Advanced Features submenu which
allows setting additional power saving parameters.

Table 3-15 Fields, Options and Defaults for the Power Menu.

Содержание LIFEBOOK 990Tx2


















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды