Fujitsu iPAD100 series Скачать руководство пользователя страница 47

Страница: 47 / 60

10 Troubleshooting

If you encounter any of the problems described in the following table while using the IPAD, take the indicated
action before notifying your maintenance representative.

Problem

User response

The main battery has no charge. Replace it with a charged main

battery.

>>Reference>>

Section 1.2, "Using the Battery"

Alternatively, charge the main battery.

>>Reference>>

Section 1.2.2, "Charging the main battery"

If the main battery is completely dead, all the data and information

in memory in the IPAD may be lost. If data has
been lost, reinstall the applications again.

The IPAD cannot be turned on.

The service life of the main battery has expired or the battery is

faulty. Install a new main battery.

>>Reference>>

Section 1.2, "Using the Battery"

The main battery may not be correctly installed. Install the main

battery correctly.

>>Reference>>

Section 1.2.3," Installing and removing the main battery"

The iPAD cannot be turned on.
(continued)

The battery lock switch may be unlocked.

>>Reference>>

Section 3.7.2, "Completely resetting the iPAD”

The screen appears for a moment, then turns

black when you press the
Power key to turn on the power.

The main battery may have no charge. Replace it with a charged

main battery.

>>Reference>>

Section 1.2, "Using the Battery"

The speaker is silent.

The speaker may be set to "Low." Check the volume setting of the

speaker.

>>Reference>>

Section 3.3," Adjusting the Volume"

The touch panel does not respond.

The coordinates on the touch panel may be misaligned. Perform

touch panel correction.

>>Reference>>

Section 3.5, "Correcting the Coordinates on the Touch

Panel"

The front light is dark or turns black.

The main battery may have no charge. Replace it with a charged

main battery.

>>Reference>>

Section 1.2, "Using the Batte

ry"

Содержание iPAD100 series





























































Результаты поиска

Содержание iPAD100 series

Отзывы:

Похожие инструкции для iPAD100 series

Бренды по названию

Популярные бренды

Fujitsu iPAD100 series, Руководство по эксплуатации

Результаты поиска

Содержание iPAD100 series

Отзывы:

Похожие инструкции для iPAD100 series

Бренды по названию

Популярные бренды