HandyDrive-5 - Operations Manual R.1
HandyDrive Installation Steps
1.
Plug the USB Mini-B end of the cable into the HandyDrive, and place the USB Series “A” plug
into the host computer.
2.
MS Windows will detect the connection of a “
USB Mass Storage Device
”, and report that
“
USB2.0 HandyDrive500
” is ready for use. Depending upon the capacity, you will see the new
drive in the storage device list, e.g.
Handy160 (D:)
3.
Installation is complete, when the MS Windows
Found New Hardware wizard reports that the
drive is ready for use.
Should the need arise to reset the partitions from the factory defaults; a
Format & Partition
Utility
is included with the bundled software package. See the next section of the manual for
the utility software operating procedure.
