En-10
ADJUSTING THE DIRECTION OF AIR CIRCULATION
●
Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Controller.
●
Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the air
fl
ow-direction louvers have stopped
moving.
WARNING
Never place
fi
ngers or foreign objects inside
the outlet ports, since the internal fan ope-
rates at high speed and could cause per-
sonal injury.
●
Always use the Remote Controller’s SET
button to adjust the vertical air
fl
ow lou-
vers. Attempting to move them manually
could result in improper operation; in this
case, stop operation and restart. The
louvers should begin to operate properly
again.
●
During use of the Cooling and Dry modes,
do not set the vertical Airflow Direction
Louvers in the range (
4
-
6
) for long pe-
riods of time, since water vapour may con-
dense near the outlet louvers and drops
of water may drip from the air conditioner.
During the Cooling and Dry modes, if the
Airflow Direction Louvers are left in the
range (
4
-
6
) for more than 20 minutes,
they will automatically return to position
3
.
●
When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature should
be considered carefully when making
settings.
Vertical Air Direction Adjustment
Press the SET button (Vertical) (Fig. 5
M
).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
6
Types of Air
fl
ow Direction Setting:
1
,
2
,
3
,
4
,
5
,
6
: During Cooling/Dry/Fan mode
The Remote Controller’s display does
not change.
●
Use the air direction adjustments within the ranges shown above.
●
The vertical air
fl
ow direction is set automatically as shown, in accordance with the
type of operation selected.
During Cooling/Dry mode
: Horizontal
fl
ow
1
●
During AUTO mode operation, for the
fi
rst a few minutes after beginning operation,
air
fl
ow will be horizontal
1
; the air direction cannot be adjusted during this period.
●
Direction
1
2
Only the direction of the Airflow Direction Louver changes; the direction of the
Power Diffuser does not change.
Horizontal Air Direction Adjustment
Press the SET button (Horizontal) (Fig. 5
N
).
●
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
The remote controller’s
display does not change.
1
2
3
4
5
1
2
3
4
5
6
9315345639_OM.indb 章节1:10
9315345639_OM.indb 章节1:10
11/12/2015 2:18:45 PM
11/12/2015 2:18:45 PM
