Fujitsu FUTRO S900, Руководство по эксплуатации

Страница: 63 / 125

Operation English - 17
Realtek RTL 8139 / 8130 / 810x BOOT Agent
Configuration Menu v2.13
Network Boot Protokol PXE [RLP]
Boot Order Int19h [PnP/BEV(BBS)
/ROM Disabled/
Int18h]
Show Config Message Enable [Disable]
Show Message Time 3 Seconds [5 / 8]
<ESC> <Space> <F4>
Quit
Con fi guration menu screen.
The following settings are possible:
Network Boot
Protocol
:
PXE (standard)
or RPL Speci fi cation of the system boot protocol used.
Boot Order : Int 19h The network is always started fi rst before the local
devices are activated.
PnP/ BEV (BBS)
If a BBS-BIOS (BIOS Boot Speci fi cation) exists,
the system is started by the BBS-BIOS.
ROM Disabled The entire mechanism for the system boot is
deactivated. The system can only be activated via
the local devices.
Int 18h The devices set in BIOS Setup are enabled.
Show Con fi g
Message :
The following message can be activated or deactivated during the
system boot:
Realtek RTL8139(X)/8130/810X Boot Agent Press Shift-F10
to configure …….
Show
Message
Time
:
Indicates the time in seconds for which the following message is
displayed during the system boot:
Realtek RTL8139(X)/8130/810X Boot Agent Press Shift-F10
to configure …….
The settings are not effective until after saving and another PXE system boot.
Fujitsu Technology Solutions 59