Fujitsu FTP-639MCL354, Технические характеристики товара

Страница: 7 / 26

FTP-639MCL354 SPECIFICATION
A1NA02273-0354
Dept. to
control the original document
Date
Date
Rev.
Design
Design
Inspection
Inspect.
Changes made
Approv.
FUJITSU COMPONENT LIMITED
Name
Drawing
No.
Page
Submit to
7 26
2-6 The supply method of rolled paper
(1) When printing in the paper supplied from rolled paper, printing disorder may
occur according to the inertia of rolled paper at the time of a printing start.
When you use the rolled paper exceeding
φ
80mm, please establish the
mechanism for a shock buffer between rolled paper and a printer.
2-7 Others
(1) If any trouble occur, it shall be solved by mutual discussion based on this specification.
Only the printer is subject to quality assurance.
(2) Changes and additions that do not have compatibility of this specification shall be carries out
according to the mutual discussion. However, because this printer is the standard model,
changes can be carried out without notices within a range where compatibility exists.
(3) This thermal printer comes with an 18-month warranty after the date of production (printer
serial No.). Any failure caused by the customer side in the warranty period and after expiry
of the warranty shall be serviced with charge. The maintenance service can be available in
five year after the date of discontinuation of producing this printer.
(4) This printer does not provide the dust-tight and drip-proof structure. Take measures for the
dust-tightness and drip-proof from the main body casing side, as required.
(5) Surfaces and edge surfaces of metallic parts may change colors; therefore, take measures for
discoloration as required, such as covering with a casing.
(6) Smoke may be generated from parts of the printer; therefore, take measures for preventing
any foreign conductive materials from entering the inside as required, such as covering with
a casing.