For USA
Federal Communications Commission Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1)
This device may not cause harmful interference, and
2)
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
For CANADA
Industry Canada Statement
This equipment complies with Industry Canada RSS210 rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
For EU
CE Marking
This product is in conformance with the requirements of European Council Directive: R&TTE Directive 1995/5/EC
Applied standards:
- EN 60950-1
- EN 300 328
- EN 301 489-1
- EN 301 489-17
- EN 50581
QUICK START GUIDE
It explains the main functions and the usage of this product.
Before using this product, please download complete User's Guide from our website and be sure to read it.
URL : http://www.fcl.fujitsu.com/en/support/thermal-printers/
If you have a difficulty to get the User’s Guide, please contact our distributor.
(1)
List of packaged items
At first, please make sure that printer, battery, AC adapter and safety precautions are included.
If one is missing, please ask the distributor.
Printer
Battery
AC adapter
Safety Cautions
(This Document)
AC Cable
Roll Paper
(2)
Inserting the battery
Please put the battery into the printer by the following procedures.
1) Slide the cover lock and lift the
battery cover to open.
2) Set the battery and slide to
battery terminal side for battery
locking.
3) Close the battery cover.
Cover close
Battery Cover
Cover Lock
Cover open
Battery lock