background image

 

3 0  

 
 
 
 
 
 
 
 
 

 

Declaration of Conformity

   

Model Number                  :  FS-1004MU,  FS-1008MU 

Trade Name            :   KVM Switch 

Responsible party      :   FUJITSU COMPONENT AMERICA, INC. 

Address              : 250 East  Caribbean Drive, Sunnyvale,CA94089 

Telephone number     :   (408) 745-4900 

This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two 

conditions : (1) this device may not cause harmful Interference, and (2) this device must accept any 

Interference received, Including Interference that may cause undesired operation.    DOC Class B

 

 
 
 
 
 

KVM Switch [FS-1004MU / FS-1008MU Series] 
 

 

User’s Manual 

 

 

Published

        

March 2005

 

Published by FUJITSU COMPONENT LIMITED

 

 

 
 

  

Printed in Japan 

 
 
All trademarks or registered trademarks are the property of their respective owners. The information contained in this 
document has been carefully checked  and is believed to be reliable. However, FUJITSU COMPONENT 
LIMITED (FCL) or its affiliates assume no responsibility for inaccuracies. The information contained in this document 
does not convey any license under the copyrights, patent rights or trademarks claimed and owned by  FCL  or its 
affiliates. FCL or its affiliates bear no responsibility for infringement of patent or other rights of third parties 
attributed to the use of information in this manual. FCL or its affiliates reserve the right to change products or 
specifications without notice. No part of this publication may be copied or reproduced in any form or by any means, or 
transferred to any third party without the prior written consent of FCL 
 

Содержание FS-1004MU

































Отзывы: