Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
2 Easy Kit Manual
This chapter gives introduction how to setup Easy Kit.
2.1 Easy Kit Overview
Below is the close look of a MB95200 Series Easy Kit. The Part Number is
FMCDCMB95260H-EK-01. It provides a debug platform for the MB95200 Series MCU in a
small size (85mm (L) X30mm (W) X10mm (H)).
Mode switch
Easy BGMA
Easy EV-board
2.2 Function List
ID
Function description
Remarks
1
Support MB95200 Series MCU
MCU MAX machine clock: 16.25 MHz
MCU power voltage: 2.4*1*2 V ~ 5.5*1 V
2
Break pointer
256 software breakpoints
3
USB interface to PC/SOFTUNE
Compatible to USB protocol version 1.1
4
1-Line UART interface
to the
MB95200 Series MCU
The Baud rate is 62,500 bps
5
Support the MCU flash programming
for engineering development
Flash operation at MCU rated voltage.
The program and read speed is about 800 B/S.
*1: The value varies depending on the operating frequency, the machine clock or the analog
guaranteed range.
*2: The value is 2.88 V when the low-voltage detection reset is used.
MCU-AN-500059-E-12 – Page 6
