manualshive.com logo in svg

Fujitsu FI-800R, Руководство оператора, Страница: 119 / 205

Поделиться
Скачать
Fujitsu FI-800R Скачать руководство пользователя страница 119

Scanning Does Not Start

Check the following points

●

Is the document inserted into the return path opening or loaded in the ADF paper chute (feeder)
correctly? (page 119)

●

Is the ADF closed properly? (page 119)

●

Is the USB cable connected properly? (page 119)

If the problem persists, refer to 

The First Measures to Take When You Encounter any Errors or Troubles

(page 140)

 and take measures accordingly. If the problem still persists, check each item in 

Before You

Contact the Scanner Service Provider (page 141)

 first, then contact the distributor/dealer where you

purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.

●

Is the document inserted into the return path opening or loaded in the ADF paper chute (feeder) correctly?

Solution

Reinsert the document into the return path opening or reload it in the ADF paper chute (feeder).

●

Is the ADF closed properly?

Solution

Close the ADF firmly.
If the document is caught in the ADF, remove the document and close the ADF.

●

Is the USB cable connected properly?

Solution

Connect the USB cable properly.
For details, refer to Getting Started.

Troubleshooting

119

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов