background image

fi-71

X

0/fi-72

X

0 C

ONSUMABLE

 R

EPLACEMENT

 

AND

 C

LEANING

 I

NSTRUCTIONS

14

Fujitsu Computer Products of America, Inc.

http://us.fujitsu.com/fcpa

1255 East Arques Avenue  Sunnyvale, CA 94085-4701 (800)626-4686 (408)746-7000
[email protected]
© 2013 Fujitsu Computer Products of America, Inc.  All rights reserved, Fujitsu and the
Fujitsu Logo are registered trademarks, ScanCare and ScanAid are trademarks of
Fujitsu Computer Products of America, Inc

All statements herein are valid only in the U.S. for U.S. residents, are based on normal
operating conditions, are provided for informational purposes only and are not
intended to create any implied warranty of merchantability or fitness for a particular
purpose.  Fujitsu Computer Products of America, Inc. reserves the right to modify at any
time without prior notice these statements, our products, their performance
specifications, availability, price and warranty, post-warranty and service programs.

Printed in the US.A

Attach the shaft by inserting the left end of the shaft into the
hole in accordance with the hole shape, and then attach the
right side of the shaft.

Close the Brake Roller cover and then close the ADF.

Содержание fi-71X0















Отзывы: