Chapter 5 Daily Care
75
The outside of the scanner, including the ADF paper chute
(feeder) and the stacker, should be cleaned with either a piece
of dry cloth, a cloth moistened with Cleaner F1/mild detergent,
or a sheet of Cleaning Wipe.
fi-7140
fi-7240
5.2 Cleaning the Outside
ATTENTION
To avoid deformation and discoloration, never use paint thinner or
any other organic solvents.
Be careful not to let any moisture or water inside the scanner during
cleaning.
It may take a long time to dry if an excessive amount of Cleaner F1/
mild detergent is used. Use it in small quantity. Wipe off the cleaner
completely to leave no residue on the cleaned parts.
Thinner
Cleaner F1
or Mild Detergent
Cloth
Cleaning Wipe
Thinner
Cleaner F1
or Mild Detergent
Cloth
Cleaning Wipe
