background image

iv

Canadian DOC Regulations

This digital apparatus does not exceed the Class B limit for radio noise emissions from 
digital apparatus set out in the Radio interference Regulations of the Canadian Department 
of Communications.
Le présent appareil numérique n'émet pas de parasites radioélectriques dépassant les limites 
applicables aux appareils numériques de la classe B et prescrites dans le Règlement sur le 
brouillage radioélectrique dictées par le Ministère des Communications du Canada.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Bescheinigung des Herstellers / Importeurs

Für den fi-4860C2 wid folgendes bescheinigt:

 In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört

 Maschinenlärminformationsverordnung 3.GPSGV: Der höchste Schalldruckpegel beträgt 

70 dB (A) oder weniger, gemäß EN ISO 7779.

International E

NERGY 

S

TAR®

 Program

As an 

E

NERGY 

S

TAR® Partner, PFU LIMITED has determined 

that this product meets the 

E

NERGY 

S

TAR® guidelines for 

energy efficiency.
The International 

E

NERGY 

S

TAR® Office Equipment Program is 

an international program that promotes energy saving through the 
penetration of energy efficient computers and other office 
equipment. The program backs the development and dissemination 
of products with functions that effectively reduce energy 
consumption. It is an open system in which business proprietors can participate voluntarily. 
The targeted products are office equipment such as computers, monitors, printers, 
facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are 
uniform among participating nations.

This product meet the 

E

NERGY 

S

TAR® guidelines of Japan and U.S.

Содержание FI-4860C2
























































































Отзывы: