manualshive.com logo in svg

Fujitsu fi-4640S, Руководство оператора

Поделиться
Скачать
Fujitsu fi-4640S Скачать руководство пользователя страница 38

 3-6

 NOTICES

Note the following when preparing the paper.

• Remove paper clips and staples. Flatten the staple holes.

• Read the following documents using the Flatbed:

-  Paper with clips or staples.
-  Paper written on with wet ink.
-  Paper of uneven thickness (for example, envelopes).
-  Paper with large rumples or curls.
-  Paper with folds or tears.
-  Tracing paper.
-  Coated paper.
-  Carbon paper.
-  Paper shorter than A8 (portrait) size or wider than A3 size or 11 x 17 inches.
-  Materials other than paper (for example, clothes, sheet metal, or OHP film).
-  Photographic paper.
-  Paper with perforations on the side.
-  Non-rectangular paper.
-  Very thin paper.

•  Set documents on the ADF so that the curl of the leading edge does not exceed the measures shown

below.

•  To avoid skewing, do not feed docments of different widths during the same batch.

3

Adjust the stacker extension to the
paper size, and then flip out the plate.

Less than
5mm

More than 30mm

Top of the paper

Less than
3mm

More than 30mm

Feed direction

Top of the paper

Read surface

Feed direction

Read surface

ADF paper chute

Stacker

Содержание fi-4640S





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды