Fujitsu fi-453PR, Руководство оператора

Страница: 10 / 16

8 |
3. Basic Operation
3.1. Setting Printing Position
1. Open the Print Cartridge Cover.
2. Move the Print Cartridge Holder to an appropriate
printing position.
Grab the Print Cartridge Holder as below, slide it to right or
left within the document width and set it at a position
suitable for your purpose.
HINT
●
The “ ▲ ” mark shows the Print Cartridge
position.
●
The Imprinter cover has document size
markings, please use them to adjust the
printing position.
●
Put the actual document on the ADF to
confirm that the Print Cartridge is positioned
within the document width.
3.2. Print Setup
You can configure settings of the imprinter with the
scanner driver dialog box.
FUJITSU TWAIN driver (Example)
Click [Option] button.
In [Option] dialog box, choose [Imprinter (Endorser)] tab and
specify the Imprinter settings.
HINT
Available items are:
• Y offset (Printing)
• Font
orientation
• Strings definition
（
Max. 40 characters
）
• Counter Setup （ column, add/subtract, step ）
For the details, please refer to “FUJITSU TWAIN
32 Scanner Driver User’s Guide” or “TWAIN
Driver Help”
3.3. Replacing the Print Cartridge
Replace the Print Cartridge as follows:
• When the following message appears, replace the
Print Cartridge as soon as possible.
If you keep on printing without replacing the
cartridge, light print problem may occur.
• When installing or replacing the print cartridge, be
careful not to insert it out of place.
1. Press button to turn off the Scanner.
2. Grab the both ends of the Print Cartridge Cover,
pull and turn it towards you to open the cover as
shown below.
Print Cartridge Holder