Fujitsu FD-1000ST, Руководство пользователя

Страница: 9 / 36

5
Installation
Please note the safety information in [Important Notices].
Observe the specified environmental conditions when using the
Console Drawer (See [Technical Specifications] for more
information).
CAUTION
Avoid dust, humidity and extreme temperatures. Installation may
require two or more people in some situations. Be careful not to
pinch your fingers or hands between the guide rails and the
Console Drawer.
Installing Guide Rails
Install the guide rails with the guides toward the front so that the
Console Drawer can be mounted on them. (Rear Spacers will be
at the back)
See the installing the guide rail diagram on page 6.
1. Insert the rear spacer studs of the guide rails into the holes in the rear rack pillars.
Fasten each guide rail with two screws inserted from the outside of the pillar, one
into each of the top and bottom holes of the rear spacer.
2. Extend the guide rails to reach the inside of the front rack pillar.
Fasten each guide rail in place with two screws, one into each of the top and bottom
holes of the front spacer. (Attach the guide rails inside the front/rear rack pillar so
that the guides face inwards.)
3. Install the left and right guide rails at the same height.
Refer to the enclosed manual for details on how to install additional guide rails.