PREFACE
Thank you for purchasing the MB2144-227-01 (LQFP-64P*
1
probe header for the MB89051 series).
The MB2144-227-01 is used for the probe header to connect an emulator for the F2MC*
2
-8L to a
user system. The MB2144-227-01 is used with the MB2144-210A universal cable assembly (sold
separately).
This manual explains the handling of the probe header (MB2144-227-01).
Before using the MB2144-227-01, be sure to read this manual.
*1: The FPT-64P-M09 is the package for the probe header.
*2: F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
■
Caution of the products described in this document
Cautions in the following correspond to the products described in this document.
CAUTION
The wrong use of a device will give an injury and may cause
malfunction on customers system.
Electric shock
Turn off the product and any connected devices, and unplug the power cable from the
outlet in case of the following, otherwise you get an electric shock.
•
When setting the jumper plug
•
When connecting the universal cable assembly and the probe header
•
When connecting the probe header and the user system
•
When mounting a mass production MCU on the user system
Damage
When connect the probe header to the user system, correctly position the index mark (
S
)
on the NQPACK mounted on the user system with the index mark (
T
) on the probe
header, otherwise the adapter unit and the user system might be damaged.
Damage
When mounting a mass production MCU, correctly position pin 1, otherwise the mass
production MCU and the user system might be damaged.
