SK-96320-80PMC User Guide
Chapter 3 Jumpers and Switches
FMEMCU-UG-960010-12
- 12 -
© Fujitsu Microelectronics Europe GmbH
ON
OFF
Dip-Switch S2
(run mode)
1
2
3
4
MD0 MD1 MD2 nc
3 Jumpers and Switches
This chapter describes all jumpers and switches that can be modified on the evaluation
board. The default setting (MB96320 Series) is shown with a grey shaded area.
3.1 Operating Mode (S2)
The DIP-switch S2 is used to set the operating mode of the
K
C. Ensure that the mode pin
settings correspond to the operation-mode of the application. For more detailed information
please check the Hardware-Manual of the microcontroller.
DIP switch
Setting
Logical value
ON (closed)
1 (high)
S2/1 (MD0)
OFF (open)
0 (low)
ON (closed)
1 (high)
S2/2 (MD1)
OFF (open)
0 (low)
ON (closed)
1 (high)
S2/3 (MD2)
OFF (open)
0 (low)
S2/4 not
connected
