Preliminary
40(45)
Prepared
Document Number
Manfred Ortmann
Approved
Checked
Date
Revision
Storage
20091005
PA 4.2
Mycable01
2.2.11 RGB Input
Pic. 213: RGB input, X900
X900 ( CT0915P5K27, HDDSUBConnector from Yamaichi ) is the connector for the RGB
graphic signal which will be captured from the AD9883A from Analog Devices ( U900 ) on the
EVB JADED Interface board.
The AD9883A is a complete 8bit, 140 MSPS, monolithic analog interface optimized for
capturing RGB graphics signals. Its 140 MSPS encode rate capability and full power analog
bandwidth of 300 MHz supports resolutions up to SXGA ( 1280 × 1024 at 75 Hz ). The
AD9883A includes a 140 MHz triple ADC with internal 1.25 V reference, a PLL, and
programmable gain, offset, and clamp control. This interface is fully programmable via a 2wire
serial interface.
Following table shows the assignment of pins, signals and function from the RGB Input
connector.