ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
3
Copyright 2010 FUJITSU LIMITED
P3AM-2722-04ENZ0
Preface
This document briefly explains the operations that need to be performed by the user in order to
connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to a
server running Solaris OS via a Fibre Channel interface.
This document should be used in conjunction with any other applicable user manuals, such as
those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server,
OS used, Fibre Channel cards, drivers, etc.
Note that this manual refers the following documents.
•
Server Support Matrix
•
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel)
for Oracle Solaris
Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000
models 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100,
and 2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems.
Fourth Edition
December 2010
The Contents and Structure of this Manual
This document is composed of the following three chapters.
•
Chapter 1 Workflow
This describes the workflow to set up multipaths using MPxIO.
•
Chapter 2 Using MPxIO
This describes points to note when using MPxIO.
•
Chapter 3 Setting Up MPxIO
This describes how to set up MPxIO.
